0

Your Cart is Empty

Continue Shopping
    • R 0.00 Subtotal
    • Free delivery for all orders over R450!

    • SAFE & SECURE SHOPPING & PAYMENT
      Mastercardmobicred OzowVisa

    October 13, 2020 2 min read

    Activated Charcoal & Tea Tree Soap

     

    This is a spin on the classic skin-detoxing charcoal and tea tree soap, but using some luxurious oils and butters to really ramp up the skin conditioning properties.

     

    25g  castor oil (5%)

    125g  coconut oil (25%)

    200g  olive oil (40%)

    50g  shea butter (10%)

    25g  tamanu oil (5%)

    75g  cocoa butter (15%)

    90g  sodium hydroxide lye

    190g distilled water

    16g  tea tree essential oil (or do a combination of tea tree and lavender)

    2 T  activated charcoal

     

    Before you do anything, please ensure you are wearing the appropriate protective clothing, including gloves and  goggles. Do not let the lye mixture or the finished soap mixture touch your skin or you may get a lye burn. Keep pets and young children away. Work in a well ventilated area.

     

    Slowly add the lye into the water and stir until dissolved. Set aside to cool. While your lye mixture is cooling, melt all your oils and butters together. Let the oil mixture also cool. Once both the lye mixture and the oils mixture have cooled down to around 50℃ (or lower but ideally within 10℃  of each other), slowly add the lye to the oils and blend with a stock blender until trace is reached. Add the activated charcoal and blend to incorporate, then add the essential oil and blend. If you like you can also add in some clay (this will make the soap lovely and creamy) but this is optional. Pour the soap batter into molds, tapping them to release any trapped air bubbles. Then insulate your soaps for at least 2-3 days, allowing them to harden up. Once they are hard you can remove them from their molds and leave to cure for at least 6 weeks. 


    Leave a comment

    Comments will be approved before showing up.