February 09, 2022 7 min read

Easy Water-Based Serums

 

Water-based serums are light textured, water-like serums that are quickly absorbed into the skin so that actives can get to work. Water based serums allow for the delivery of water soluble actives to the skin. They’re hydrating and rather versatile to use.

You can use them directly on your skin, layer them under your moisturiser, add them to your moisturiser, or even add them to your facial mask to reap the benefits there. Makeup is also easy to apply on top of water based serums, so don’t be scared to use them in the morning.

While oil serums are richly moisturising, great for winter skins and typically used at night, water based serums are light, hydrating, ideal for any time of the year, are makeup friendly and can be used at any time of the day or night. They’re ideal to layer with other products.

 

Breaking Down A Water-based Serum

As the name denotes, water is the base ingredient in a water-based serum. But we can substitute plain old water for more exciting alternatives that are also water based such as hydrosols or aloe vera liquid.

We are rather partial to hydrosols as our water base because they smell lovely and impart other benefits of the plant to the skin, so we'll be using those in our recipes.

The main reason for using a water serum is to deliver water-soluble actives to the skin. Let’s learn a little bit more about these actives:

 

Niacinamide - otherwise known as nicotinamide or Vitamin B3, it is a powerhouse for skin: treats hyperpigmentation, regulates sebum production, reduces fine lines and water loss in the skin, and has anti aging and anti inflammatory properties.

 

Hyaluronic acid - hyaluronic acid is one of the most well known and best loved skin actives. It is famous for its ability to hold water and its skin-plumping and hydrating properties.

 

Marine collagen - the only non-vegan active here, marine collagen is derived from deepwater fish and is a protein. It helps maintain an optimum moisture balance in skin and hair care formulations.

 

Vit C - probably the most famous skincare active, ascorbic acid is brilliant for rejuvenating and brightening the skin. It is a potent antioxidant and anti-ager. It is a small molecule and is able to penetrate to deeper levels of the skin to really get to work.

 

Lactic acid - much loved for its skin brightening properties, lactic acid is an AHA (alpha hydroxy acid). It helps stimulate collagen and strengthen the skin, which equals fewer fine lines and wrinkles. The hydroxy acids exfoliate the top layer of skin, helping smooth and even complexion, keep pores unclogged, brighten skin and even fade dark marks and discoloration

 

Malic acid - another AHA (alpha hydroxy acid), malic acid is one of the more gentler acids. It exfoliates the top layer of the skin, helping to smooth and even complexion, keep pores unclogged, brighten skin and even fade dark marks and discoloration.

 

Inulin - a prebiotic that supports the skin’s microbiome and skin-friendly bacteria which keep everything balanced. It offers moisturising properties, and is a natural humectant and conditioner

 

Panthenol - otherwise known as Vitamin B5, D panthenol is a natural conditioner and makes the skin feel wonderfully smooth and hydrated.

 

Proteins - proteins such as hydrolyzed wheat protein and jojoba protein add moisture, conditioning properties and film forming properties, helping improve the appearance of fine lines, maintain an optimum moisture balance and replenish the skin.

 

Allantoin - soothing and protective, allantoin is quite a nice ingredient to include in any skincare product. It is water soluble up to around 0.5% so don’t use more than that or you’ll have some residue sitting at the bottom of your serum.

 

Other nice ingredients to include in a water based serum:

While I’m not really phased about it personally, some may prefer a slightly more viscous or gel-like texture as opposed to a watery serum. You can thicken up your serum by including a small amount of a gum such as  xanthan gum or  guar gum.

 

Adding colour: you can get creative and make a coloured serum by including colourful glycerites  (learn how to make them here), such as hibiscus, spirulina, rose etc. 

 

Humectants: while many of the actives do have humectant properties already, if you want to add in an additional layer of hydration to your serum you can include a humectant such as glycerine, a glycerite or propanediol. Keep in mind that humectants tend to feel slightly sticky on the skin if you use too much, so adding in extra may affect how your serum feels. This shouldn’t matter if you are layering products over it however. You can learn more about  humectants here. If you want to add in some glycerites for example, I would recommend sticking to 1-2% max.

 

Lastly you will want to preserve water based serums because they contain water/water based ingredients. You can use Geogard 221, Saliguard BDHA, Geogard Ultra, or you can use potassium sorbate (not a broad spectrum preservative though, so not recommended to use on its own). As these serums are going onto your face, I suggest using a preservative you are quite comfortable with. Some people (myself included) have a sensitivity to sodium benzoate, so if you do too, it may be best to avoid Geogard Ultra as it contains sodium benzoate. Most skins can happily take Geogard 221 and Saliguard BDHA so we'll use those in our formulations.

 

Can we use all of the actives together in one super-formula? 

Well yes but you probably wouldn’t want to, as some ingredients work more optimally without the others. For example niacinamide likes a pH closer to 6 so it won’t work so well with acids such as ascorbic acid, lactic acid or malic acid which have very low pH levels. Inulin also prefers a slightly higher pH (or rather, doesn’t like a low pH below 4.5) so it also isn’t great with higher amounts of the acids, but it can work well with niacinamide.

If you use too many actives in one formula you also run the risk of the serum feeling sticky or tacky. Therefore we prefer to make more individualized serums and layer them.

 

Formulations

These formulas are all made in a single bottle and are supper easy to make! Feel free to play around with mixing and matching different actives.

 

Niacinamide & HA Serum

5%  hyaluronic acid solution

5%  niacinamide

89%  hydrosol of choice

1%  Geogard 221

 

Optional: you can add a colourant like a glycerite to make it look pretty (I used hibiscus and only a few drops are necessary to achieve a stunning pink colour!)

 

Weigh out the ingredients and combine everything in a pipette or spritzer bottle. Shake well to mix in the preservative. Check the pH to around 6 and adjust with a pH adjuster if necessary.

 

Effects: evening skin tone, plumping, hydrating, reducing the appearance of fine lines over time with consistent use.

 

Collagen & HA Serum

5%  hyaluronic acid solution

5%  marine collagen

1%  Geogard 221

89%  hydrosol of choice - I like rose water and geranium hydrosol

Optional: 0.5% allantoin (reduce hydrosol by 0.5% to accommodate it)

Optional: you can add a colourant like a glycerite to make it look pretty

 

Weigh out the ingredients and combine everything in a pipette or spritzer bottle. Shake well to mix in the preservative and allantoin if using.

 

This serum will feel ever so slightly sticky to the touch due to the collagen. This is normal and will also go away after a few minutes as the serum sinks into the skin. You can also layer other skincare products on top.

 

Effects: hydrating, plumping and anti aging over time with consistent use.

 

AHA Serums

I find that due to the highly acidic nature of AHAs, a preservative may not be required if you thoroughly sterilize your utensils and the bottle. However you can of course add one if you would be more comfortable with that. AHA serums make great toners; layer them under your other skincare products.

 

Simple Lactic Acid Serum

2.5%  lactic acid

97.5% water or  hydrosol of choice

 

Combine everything in a spritzer or pipette bottle. Lactic acid can get a little sticky so it is best to apply this serum under a moisturiser. Use up to 3 times per week. Use in the evenings as AHAs can make your skin sensitive if used often. 

 

Simple Malic Acid Serum

2.5%  malic acid

97.5%  hydrosol of choice

 

Combine everything in a spritzer or pipette bottle. Use up to 3 times per week. Use in the evenings as AHAs can make your skin sensitive if used often.

 

Combination of lactic and malic acids

1%  malic acid

1.5%  lactic acid

97.5%  hydrosol of choice

 

Combine everything in a spritzer or pipette bottle. Use up to 3 times per week. Use in the evenings as AHAs can make your skin sensitive if used often. I quite like to use AHA serums as a toner.

 

Vitamin C Serum

We don’t recommend making a Vitamin C serum the way these other serums are made. Ascorbic acid, while being one of the best ingredients for skin, is notoriously unstable once it combines with oxygen and water. So if you’ve ever noticed your vitamin C serum turning brown, that means it has oxidised and is no longer providing a benefit to your skin. 

Therefore we suggest storing your ascorbic acid dry in a tin or container, and then when you want to use it, simply combine it with a little water or hydrosol for a ‘freshly made’ serum.

 

Prebiotic Serum

2%  inulin

96.5%  hydrosol of choice

1%  Geogard 221

0.5%  allantoin (optional)

Optional: you can add a glycerite for colour

 

Weigh out the ingredients and combine everything in a pipette or spritzer bottle. Inulin may take a bit of stirring to fully dissolve and if you struggle, try gently heating the inulin and hydrosl mixture to help it along. Then shake well to mix in the preservative and allantoin if using.

 

What You Can’t Add To These Serums

Don’t add essential oils, carrier oils, Vitamin E or any other oil soluble ingredients to a water serum. These are water-based serums and as such you can only add water soluble ingredients to them. If you go adding anything oil soluble, it will form an oily layer on the top as it won’t blend with the water base.

Don't add mica or other insoluble ingredients as they will sink to the bottom.

 

Tip:

Water based serums are best stored in a spritzer bottle or a pipette bottle for easy application.


7 Responses

Juliette
Juliette

June 22, 2022

Hi Heidi, hyaluronic acid can give some glide, otherwise you can make these into more of a gel-like consistency by adding a gum: either xanthan gum or hydroxyethyl cellulose.

Heidi Smith
Heidi Smith

June 22, 2022

I would like to enquire about a water based serum with a little glide for Microneedling. What do you suggest?

Juliette
Juliette

March 02, 2022

Hi Zelda, niacinamide and inulin will work well together :) go for it!

Zelda
Zelda

March 02, 2022

Thank you for these. Can I combine the Niacinamide and Inulin, or will it have an effect on the capabilities of one or the other?

Bliss Mafumhe
Bliss Mafumhe

February 21, 2022

Thank you will definately try them

Juliette
Juliette

February 14, 2022

Fantastic Marianna! :)

Marianna Van der  Merwe
Marianna Van der Merwe

February 14, 2022

Thanks for all this wonderful info. I’m saving for when I start experimenting.

Leave a comment

Comments will be approved before showing up.