Formulating With Cocamidopropyl Betaine
Cocamidopropyl betaine is my favourite surfactant. I’m a huge fan of formulating for sensitive skin and when it comes to cleansers that can be stripping, you want to choose the right surfactant to prevent that. Cocamidopropyl betaine is the perfect gentle and non-stripping surfactant.
Cocamidopropyl betaine or CAPB for short, is part of the betaine family of surfactants. Betaines are amphoteric, meaning they can be both positively or negatively charged. When used in an acidic environment such as in skin or hair products (which are almost always formulated to have a pH of 5.5 or below), CAPB has cationic and conditioning properties. This is perfect for the skin and hair!
CABP comes as a clear to yellowish liquid. It has an ASM (amount of active matter) of 30% which is a lot milder than most surfactants. It works well with all surfactants and increases their mildness and foaming abilities.
CAPB can also thicken anionic surfactants to a degree.
CAPB is suitable for children and babies, and is great for anyone with sensitive or dry skin.
CAPB has a pH of around 5 to 6 so is already fairly gentle, but you can lower the pH further to around 4.5 - 5.5 which is perfect for skin and hair.
CAPB is naturally water soluble, but being a surfactant it has emulsifying properties and can therefore blend with oils too. It will create a milky colour if blended with oils.
Keep in mind that it is possible to overwhelm a surfactant if you add too much oil, so keep your oil content at around 5% or below or your surfactant won’t foam and clean as well as it should.
Products That Contain Contain Cocamidopropyl Betaine
You will find CAPB predominantly in cleansers: facial cleansers, body washes, shampoos, etc.
It is most commonly used as a secondary surfactant, backing up another primary surfactant. But I quite like using it on its own as well because it's so gentle.
What Works And Doesn’t Work With CAPB
CAPB is a pretty robust surfactant and not a lot gets in its way! It works well in a range of pH values and you can use almost any ingredient with it.
Feel free to incorporate your favourite actives, whether oil or water soluble.
You can use oil or water based ingredients with it, just keeping in mind not to overwhelm it with oils.
Formulas With Cocamidopropyl Betaine
This simple, ultra gentle face wash is rich in hydrating glycerine, and also contains a small amount of oil for additional nourishment. It won’t make your skin feel stripped or tight, but rather soft and hydrated. The formula creates a lovely soft and low-lather creamy gel cleanser. Give it a try if you have dry and/or sensitive skin (or any skin type really!).
Simple Face Wash For Sensitive Skin
0.75% xanthan gum
1% Geogard 221
Citric acid to adjust the pH if required
Spatula to stir with
pH strips / pH meter
Mix the glycerine and xanthan gum together to create a slurry, then blend in the water until a smooth gel is formed. Add in the CAPB and blend, then add in the oil and lastly the preservative. Check and adjust the pH to between 4.5 - 5.5 if required.
Substitutions & Additions
Feel free to swap out some or all of the water content for hydrosol or a botanical infusion.
You can also take out 0.5% from the oil amount and add in 0.5% essential oil of choice. However if you have very sensitive skin it is advised to not include essential oils.
While this gentle cleanser is perfect as is, you are welcome to add in actives if you like!
You could also add some mica for colour.
About the author:
Juliette van der Meer
BSc, BScH, PGCE, Adv Dip Cosmetic Science